next up previous contents index
Next: .width Line Up: Output Generation Previous: .plot Line   Contents   Index

.four Line

General Form:
.four freq ov1 [ov2 ov3 ...]
.four 100k v(5)

The .four line controls whether WRspice performs a Fourier analysis as a part of the transient analysis. The parameter freq is the fundamental frequency, and ov1,..., are the output variables for which the analysis is desired. The Fourier analysis is performed over the interval [tstop-period, tstop], where tstop is the final time specified in transient analysis, and period is one period of the fundamental frequency. The dc component and the first nine harmonics are determined. For maximum accuracy, tmax (see the .tran line, in 2.7.10) should be set to period/100 (or less for very high Q circuits).

Stephen R. Whiteley 2022-09-18